JK Rear License Plate Bracket Install Guide

Quick answer

Install the RT-TCZ rear license plate bracket on your 2007-2018 Jeep Wrangler JK or JKU in about 15 minutes with basic hand tools.

Installation steps

1. 1. Remove the old bracket: Use a Phillips screwdriver or socket to remove the screws securing your existing license plate bracket. Keep the screws if they are still in good shape; you will reuse them. If screws are rusted or stripped, replace them with stainless steel equivalents to avoid future issues.
2. 2. Clean the mounting surface: Wipe the rear area where the bracket sits with a mild cleaner and a cloth. Remove any dirt, old adhesive, or debris so the new bracket sits flush. A clean surface prevents vibrations that can loosen the bracket over time.
3. 3. Position the new bracket: Hold the RT-TCZ bracket against the rear of your JK or JKU, aligning the screw holes with the factory mounting points. The bracket should fit snugly without forcing it. If the holes do not align perfectly, double-check that you have the correct bracket for your model year (2007-2018 JK/JKU).
4. 4. Secure the bracket: Insert the screws and tighten them by hand until snug, then give them a quarter turn with a tool. Do not overtighten, as ABS plastic can crack under excessive torque. Use a torque-limiting screwdriver if available, or simply stop when the screw head contacts the plastic firmly.
5. 5. Attach the license plate and light: Mount your license plate using the bracket's slots or holes, then reconnect the license plate light wiring if applicable. Test the light to ensure it works. If your plate light does not line up with the bracket's cutout, you may need a small adapter or reposition the light bracket.

Product details

• For 2007-2018 Jeep Wrangler JK JKU Rear License Plate Mounting Bracket Holder Frame: Made from ABS plastic, designed for 2007-2018 Jeep Wrangler JK and JKU, rear placement. ABS is lightweight and resists rust, making it a good match for outdoor use on your Jeep's rear.