Jeep Wrangler JK 4-Door Rear Cargo Cover Curtain Install

Quick Answer

Installing a rear cargo cover curtain on your 2007-2018 Jeep Wrangler JK 4-door takes about 15 minutes with no special tools. The custom-fit cover snaps into factory mounting points to hide cargo and reduce theft risk.

Installation Steps

1. Unpack and Inspect: Remove the cargo cover from its packaging. Check that the fabric curtain, two side brackets, and all mounting clips are present. Lay the cover flat to let any creases relax. If any hardware is missing, do not proceed—contact the seller before starting.
2. Prepare the Cargo Area: Clear the rear cargo floor and fold down the rear seats if needed. Wipe the trim panels where the brackets will attach to ensure a clean surface. Make sure the rear seats are fully latched upright or folded flat—the cover mounts to the side trim, not the seats.
3. Install the Side Brackets: Position each bracket against the rear side trim panel, aligning the slots with the factory mounting points. Press firmly until the clips snap into place. The bracket should sit flush and not wobble. A common mistake is forcing the bracket into the wrong slot—test fit before snapping to avoid breaking a clip.
4. Attach the Curtain Rod: Slide the curtain rod into the grooves on both brackets. Push the rod toward the rear of the vehicle until it clicks into the locking position. The fabric should hang evenly across the trunk opening. If the rod doesn't click, check that both brackets are fully seated—one loose bracket will prevent proper locking.
5. Test the Cover Operation: Pull the curtain forward to ensure it extends smoothly and retracts without binding. Open and close the tailgate to confirm the cover doesn't interfere with the latch or hinges. If the cover rubs against the tailgate seal, adjust the bracket positions slightly—a 1/4-inch shift often fixes clearance issues.

Product Used in This Guide

• For 2007-2018 Jeep Wrangler JK 4Door Car Rear Trunk Shade Cargo Cover Curtain Black: Custom fit for Jeep Wrangler JK 4-Door (2007–2018). Designed specifically for JK Unlimited 4-door models to ensure a precise fit for the rear cargo area without interfering with daily use. You won't need to modify or drill anything—the cover snaps into existing trim, making installation straightforward and secure.