Jeep Wrangler JK Rear Storage Box: Install & Fit Guide
By RT-TCZ : Accessories, Parts & Trim for Jeep | Published: 2026-10-26
Category: How-to Guides
Learn how to install a rear storage box in your 2007-2018 Jeep Wrangler JK. Step-by-step instructions, fit tips, and common mistakes to avoid.
Quick Answer
Installing a rear storage box in your 2007-2018 Jeep Wrangler JK is a simple 20-minute job that requires no drilling. Clean the mounting surface, peel the backing off the included double-sided tape, press the box into place, and let it set for 24 hours.
Why a Rear Storage Box Fits the JK So Well
The JK's rear seat area has two symmetrical side pockets that are often wasted space. A dedicated storage box turns those pockets into secure compartments for tools, recovery gear, or everyday items without taking up the cargo floor.
Because the boxes are designed specifically for the JK body, they follow the contour of the trim and leave the seat folding mechanism unobstructed. That means you keep full access to the under-seat storage and the seat's flip-and-fold function.
What to Check Before You Start
Before you peel any tape, confirm your JK's model year. The box is built for 2007-2018 models, which covers both the early and late JK generations. If you have a JL or a Gladiator, this part will not fit.
Also check that the mounting surface is clean and dry. The box relies on the included car-specific double-sided tape, so any dust, grease, or moisture will weaken the bond. A quick wipe with isopropyl alcohol solves most adhesion problems.
Installation Steps
- Clean the mounting surface: Use a microfiber cloth with isopropyl alcohol to wipe down the rear seat side trim where the box will sit. Let it dry completely. A common mistake is skipping this step, which causes the tape to fail later.
- Dry-fit the box: Hold the storage box in place without removing the tape backing to confirm alignment. Make sure it sits flush against the trim and does not interfere with the seat belt or the seat fold mechanism. Adjust before committing. If the box rocks or leaves a gap, re-check that you have the correct side (driver vs. passenger).
- Peel and press: Peel the backing off the double-sided tape, press the box firmly into position, and hold it for 30 seconds. Apply even pressure across the whole box. A common mistake is pressing only the center, leaving the edges loose.
- Let the tape set: Leave the vehicle undisturbed for 24 hours before loading the box. This gives the tape time to reach full bond strength. Avoid slamming the rear door or folding the seat during this period. After 24 hours, give the box a gentle tug to confirm it's secure.
Product Facts
- For 2007-2018 Jeep Wrangler JK Rear Trunk Seat Both Side Storage Box (2 pcs): Made of high-quality ABS with a black texture finish, designed with laser cuts for a perfect fit on 2007-2018 Jeep Wrangler JK models. The ABS material is sturdy and durable, and the black texture blends with the JK's interior so the box looks like it came from the factory.
For 2007-2018 Jeep Wrangler JK Rear Trunk Seat Both Side Storage Box (2 pcs)
