What This Guide Covers
This guide walks you through installing the Co-Pilot Dashboard Panel Trim Cover on your 2024+ Jeep Wrangler JL or Gladiator JT. Before you begin, you'll need to check your passenger airbag deployment location to ensure safe installation. The trim cover is designed for models where the airbag deploys from under the grab handle, not from the panel itself.
Product at a Glance
- For 2024+ Jeep Wrangler JL JLU & Gladiator JT Co-Pilot Dashboard Panel Trim Cover: Made of high-quality ABS material with a three-layer UV and scratch-resistant polyurethane gloss coating. The coating helps the trim resist fading and scratching from daily use, keeping your dashboard looking new.

For 2024+ Jeep Wrangler JL JLU & Gladiator JT Co-Pilot Dashboard Panel Trim Cover - For 2024+ Jeep Wrangler JL JLU & Gladiator JT Co-Pilot Dashboard Panel Trim Cover: Includes two pieces: the Co-Pilot Center Console Cover Trim Panel. You get both the left and right side trims in one package, so the installation covers the entire co-pilot area.
- For 2024+ Jeep Wrangler JL JLU & Gladiator JT Co-Pilot Dashboard Panel Trim Cover: Available in 12 colors, including Carbon Fiber, Red, Blue, and more. You can match or contrast your interior color scheme easily.
Safety Check: Airbag Deployment
Before installation, locate the passenger airbag deployment area on your Jeep. If the airbag deploys from the dashboard panel itself, this cover may interfere with its function. The product is intended for vehicles where the airbag deploys from under the handle (as shown in the product images). If you're unsure, consult your owner's manual or contact your dealer. Your safety is the priority.
Installation Steps as Supplied
Follow these steps exactly as provided with the product. Do not wash your vehicle for 48 hours after installation.
- Clean the Surface: Wipe the installation area thoroughly and ensure it is dry and free of dust. Any residue can prevent the adhesive from bonding properly.
- Peel the Backing: Tear off the self-adhesive backing from the trim cover. Avoid touching the adhesive with your fingers.
- Heat the Adhesive (if needed): If the temperature is low, warm the adhesive with a hairdryer for better adhesion. Do not overheat. Follow the supplied product instructions for specific temperature guidance.
- Press into Place: Align the trim cover on the dashboard panel and press firmly. Apply even pressure across the entire piece for a secure bond.
Removal and Residue
If you ever want to remove the trim, you can do so easily. The manufacturer states that no glue residue should remain, or it can be wiped away. This makes the upgrade reversible if you change your mind later.


