Jeep JL & Gladiator JT Dash Grill Decal: Install & Placement Guide

What this decal covers and what it does not

The RT-TCZ dashboard grill dash sticker decal is a PVC trim piece that fits 2018 and newer Jeep Wrangler JL and Gladiator JT models. It is an interior accessory, not a replacement grille or a functional vent component. The package includes seven decal pieces, and the design is laser-cut to follow the dashboard grill contours.

Because the same model can be produced differently in different countries, the product listing advises checking that the area shown in the product images matches your dashboard before purchase. If the shape or spacing differs, contact the seller before ordering rather than assuming the decal will conform.

Fitment and material at a glance

• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Fit for Jeep Wrangler JL & Gladiator JT 2018+ Confirms the model years and platforms this decal is intended for.

  

• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Material: PVC; three layers of UV and scratch-resistant polyurethane gloss coating Explains the surface finish and why the decal is designed to resist fading and light abrasion.
• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Easy DIY installation with double-sided tape; installation manual not included Sets expectations: you supply the process knowledge, and the adhesive is already on the piece.
• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Package includes 7 x Dashboard Grill Dash Sticker Decal Tells you how many pieces to account for before you start peeling tape.

Installation sequence

Work in a clean, dry space and keep the dashboard out of direct sun while the decal bonds. The steps below follow the supplied installation guide.

1. Step 1: Clean and dry the installation area: Clean the dashboard grill surface and keep it dry with no dust. A dry, dust-free surface gives the double-sided tape the best chance to bond.
2. Step 2: Test-fit before peeling: Hold the decal in place without removing the backing. Confirm the shape matches the dashboard grill area shown in the product images. If it does not, stop and contact the seller before purchase or installation.
3. Step 3: Peel the self-adhesive backing: Tear off the self-adhesive on the back of the decal. Avoid touching the adhesive side with your fingers.
4. Step 4: Apply and press: Set the decal into position and press it down. If the weather is below 15 degrees, the supplied guide suggests heating the self-adhesive with a hairdryer for better adhesion.

The 72-hour dry window and cold-weather notes

• Keep it dry for 72 hours: The supplied instructions say to keep the installed decal away from water and dry for 72 hours or 3 days after installation.
• Do not wash the car for 48 hours: The guide also states not to wash the car within 48 hours after installation. Treat the longer 72-hour dry window as the safer outer limit.
• Cold-weather adhesion: Below 15 degrees, the guide recommends using a hairdryer on the self-adhesive. Do not use a heat gun or open flame, and keep the heat moving.
• If a piece lifts later: The product listing notes that if a piece falls off on some car models, you can add some tape and put the cover back on.

Placement and removal: what to expect

The decal is intended for the dashboard grill area, and the supplied evidence does not list other approved locations. Because the package contains seven pieces, lay them out and match each piece to its location before peeling any backing. The laser-cut design is meant to follow the dashboard contours, but the listing does not provide a piece-by-piece placement map, so use the product images as your reference.

Removal is described as easy: the listing says you can remove the decal without leaving glue, or erase any residue. That is a useful option if you change your interior look later, though the adhesive is also described as super-strong, so peel slowly rather than yanking.

Product facts relevant to placement and care

• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Placement on Vehicle: Dashboard Confirms the intended location for this decal set.
• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Color: Black The available variant is Black, so plan the rest of your interior accents around that finish.
• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Manufacturer Warranty: 1 Year Gives you a stated coverage period to reference if a defect appears.
• For 2018+ Jeep Wrangler JL & Gladiator JT Dashboard Grill Dash Sticker Decal: Condition: New; Brand: RT-TCZ Identifies the brand and condition of the item you are installing.