Start with your door hinge, not just your model year
Door hinge foot pegs give you a place to rest a foot when the doors are off, but they only work if the hinge area on your Jeep matches the shape the peg is designed for. The RT-TCZ set is listed for 2007–2018 Wrangler JK and JKU, 2018–2020 Wrangler JL and JLU, and 2020 Gladiator JT. That covers a lot of Jeeps, but the listing itself warns that the same model can be produced differently in different countries, so a model-year match alone is not a guarantee.
Before you order, look at the hinge area on your own Jeep and compare it with the product photos. The listing asks you to confirm that the relevant part of your car matches the picture, and to contact the seller before purchase if you see any differences. That is the single most useful check you can make, because a foot peg that does not sit correctly on the hinge is not a safe or comfortable place to put weight.
What the RT-TCZ foot peg set confirms
- For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step: Fitment is listed as 2007–2018 Jeep Wrangler JK and JKU, 2018–2020 Jeep Wrangler JL and JLU, and 2020 Jeep Gladiator JT. This is the starting point for deciding whether the pegs are even in the right family for your Jeep, before you check the hinge shape.

For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step - For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step: The pegs are made of iron with a powder-coated finish and a solid steel construction. The material tells you what you are mounting and how it should be cared for, without promising anything beyond the supplied description.
- For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step: An anti-skid strip is part of the design. That strip is the part that contacts your foot, so it is worth checking it is intact and clean before each use.
- For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step: The package includes two foot pegs, and placement is listed for both right and left. You are buying a pair, so plan for both sides of the Jeep rather than a single peg.
- For Jeep Wrangler JK JL Gladiators JT Foot Pegs Door Hinge Foot Step: The listing describes the pegs as easy to install and remove, and no installation manual is included. You will be working from the product listing and your own observation of the hinge, not from a printed step-by-step guide in the box.
A practical install sequence for door hinge foot pegs
The listing confirms that the pegs are easy to install and remove, but it does not supply a detailed procedure, torque values, or a manual. The steps below are a sensible order of work based on what the listing does say; they are not a substitute for the manufacturer's instructions, which are not included.
- Match the peg to the hinge before you tighten anything: Hold the peg against the hinge area and compare it with the product photos. The listing specifically asks you to confirm the part of your car matches the picture, so do that check with the peg in hand, not just on screen.
- Fit one side first, then the other: Because the set includes two pegs and lists both right and left placement, install one side and check how it sits before repeating the process on the other side.
- Keep the anti-skid strip clean and in place: The anti-skid strip is the surface you will step on. Make sure it is seated correctly and free of grit before you put weight on the peg.
- Test with light pressure before full weight: The listing does not give a load rating or a tightening specification. Press down gradually the first time and stop if anything shifts, rocks, or feels loose.
- Remove them when you do not need them: The listing describes the pegs as easy to remove, which is useful if you want a clean hinge area when the doors are back on.
Where the listing stops short, and how to handle it
The supplied information does not include an installation manual, a torque figure, a maximum load, or a step-by-step fitment diagram. It also does not confirm whether the pegs are designed to stay on with the doors closed. Treat those as open questions rather than assumptions. If any of them matter to how you plan to use the pegs, ask the seller before you order, especially since the listing itself invites you to contact them if you see differences.
The one-year manufacturer warranty is the main after-sales support stated in the listing. Keep your order details in case you need to use it.
JK, JL, and JT: what the fitment range means for you
The same RT-TCZ peg set is listed across three Jeep generations, but that does not mean every hinge on every year is identical. Use the table as a starting filter, then confirm the hinge shape on your own vehicle.
- Jeep Wrangler JK and JKU (2007–2018): Listed as compatible. This is the range most buyers searching for Jeep Wrangler JK foot pegs will be working with, but the country-of-production warning still applies.
- Jeep Wrangler JL and JLU (2018–2020): Listed as compatible for those model years. If your JL falls outside that window, the listing does not confirm fit, so check with the seller.
- Jeep Gladiator JT (2020): Listed as compatible for the 2020 model year. Later JT model years are not confirmed by the supplied information.
Checks to make before you click buy
- Photograph your hinge area: A quick photo of your own door hinge next to the product image is the clearest way to spot a mismatch before you order.
- Confirm you are getting a pair: The package includes two pegs, so check that matches what you expect for left and right sides.
- Decide how often you will remove them: The listing says they are easy to install and remove, which suits occasional doors-off use, but no removal procedure is supplied.
- Ask about anything the listing leaves open: Load limits, door-closed clearance, and detailed fitting steps are not confirmed in the supplied information. The listing invites you to contact the seller with questions, so use that.


